Jump to content
Highlander

12 Gauge Shotgun: Weatherby SA-459 TR, 18.5" chrome lined barrel

Recommended Posts

Loving my new Weartherby semi-auto 12 gauge calling shotgun. Best part, it doesn't rattle like a pump shotgun. I plan on mounting an IR laser on the rail to use in conjuction my with PVS 14 setup.

 

D66C513D-0E5A-4AAA-B9B9-6D4B2E662AFF_zps

 

 

Load Data Source: RSI, Heavyweight Shot, Reloader's Guide Volume 3

Page 7 , Load # 15 (altered)- Once Fired Federal 3" Premium Hull, Win 209 Primer, Steel Powder, SAM1 Wad, 647 grains (70 pellets) of HW13 (tungsten) in BB .180".and 14grains of 3mm Plastic Pellets (bean bag fill) over shot.

 

Note: The load calls for two 1/8" felts which weigh a total of 4 grains (2gr each). I used an additional 4 grains of plastic pellets in lieu of the felts which I calculated into my payload weight equation.

80753488-CB67-4EAC-BE0E-65B586F8FD0A_zps

 

Pattern Distance: 40yards. My focus is on the overall pattern and not how many are in an 8.5" circle.

 

 

Primos Dead Dog choke .675"- Actual average velocity: 1375 FPS with 20 hits within 8.5" circle, 35 hits outside of 8.5" circle on W30" X L36"pattern board= 55 total hits.

 

Note: The patterns were so consistent that the POA and POI were virtually the same from 20-40yds!

D9492D43-06BC-4AC6-82B9-0DF43420EA62_zps

Edited by Highlander

Share this post


Link to post
Share on other sites

×